Distiller magazine

Distiller FA 2020

Distiller magazine a publication of the American Distilling Institute, the Voice of Artisan Distilling; devoted to the craft spirits industry: vendors and distillers alike.

Issue link: http://distilling.uberflip.com/i/1306663

Contents of this Issue

Navigation

Page 157 of 171

158 distiller (503) 222-7079 AGERTANK.COM You need tanks and you need them now, but compromising on quality to get them fast is not how great distilling is done. We're ready. Letina European-designed and built stainless tanks — jacketed, single wall, variable, you name it — are in stock in our Pacific Northwest warehouse, ready to ship. WANT MORE INFO? VISIT: agertank.com/letina now in stock, ready to ship distilling tanks european cr aftsmanship in stainless steel now now now now now now now now now now now now now now now now now now now now now now now now now now now now now now now now now now now now now boiler feed water. It should have no more than 0.25% ABV, which can be tested by condensing vapor from, say, the 10th tray, with an ebulliometer or by distillation and an alco- hol hydrometer. ere is also a system used in heating a column that employs a thermo-compressor to recover steam from the effluent, but that is not the subject of this article. Original beer columns used vertical, not the modern multi- pass horizontal design. e table illustration on p. 158below is a rough chart of capacities for beer columns with different diameters. e principle of column distillation is illustrated in Exhibit 2. Please note that the foregoing is not a definitive guide to the design of the two stripping systems described. Many vari- ations can be employed. Also, with regard to the above engineering factors, it is nec- essary to consider tray design, condenser configurations and materials of construction. Sizing of condensers in relation to water temperature and availability is also a factor. Air-cooled condensers have also been used in countries where water is a limited resource. Pump motors in the vicinity of the still should be explosion proof. END To convert USPG/HR to USG/HR: for 60% ABV USPG x 100/120 = USG. eq 48 US pg = 40 USG @ 60% • Capacities above are based on a clean column with adequately sized holes in trays to suit the beer feed type, ie., corn vs. molasses. Rye can reduce throughput. Downcomers must also be properly sized • Output at 60% ABV (120 US pf.) is based on having up to 8 rectifying trays (bubble caps or tunnels) to achieve this ABV without excessive reflux. The above does not apply to a vapor re-use rectifier. • Beer column with 8 rect. trays should produce a flavorful spirit that can be further purified in a batch or continu- ous rectifier. • Neutral spirit (for vodka or gin) may require a purifier (heads) column or extractive column.

Articles in this issue

Links on this page

view archives of Distiller magazine - Distiller FA 2020